OUT^® White Brite^® Laundry Whitener

OUT^® White Brite^® is a unique, multi-purpose laundry whitener designed to remove dinginess, yellowing, rust and hard water stains, iron-fortified baby formula stains and stubborn red clay and red dirt stains. OUT White Brite also reverses dye stains caused when whites and colors are washed together. OUT White Brite is safe for whites, delicates and colorfast fabrics and is more effective and safer than bleach.

OUT White Brite can be used with regular detergent. However, DO NOT MIX White Brite WITH BLEACH OR PEROXIDE or OXI-STAIN REMOVERS or OXI-DETERGENT.

The Summit Brands product line is available for purchase through national retailers, both in stores and online; some products may also be available for purchase through our website. Use the “Where to Buy” button to locate online and local retailers who carry this product or begin your purchase through the site.

White clothing can soak in OUT White Brite until yellowing is gone. We recommend 20 minutes. Stubborn stains may require additional soaking time, even as long as 2-3 hours. Do not soak longer than necessary.

White Brite is intended to whiten and brighten white laundry and can be used on colored laundry only if:

1. Each colored item is first tested to determine colorfastness of the dye, which will avoid bleeding or discoloring.
2. If acceptable after testing, wash each item separately using the instructions for white clothes.

Note – this product may permanently damage colors, embroidery and logos that cannot be corrected.

When used as directed, OUT White Brite is safe for use in all washing machines, including top loading, front loading and HE, and will not harm the washer tub, surfaces, hoses, detergent dispensers or any of the components. White Brite is plumbing and septic safe.

OUT White Brite has only been tested on laundry as a fabric cleaner and is not intended for other types of cleaning.

When used as directed, OUT White Brite is safe for all plumbing and septic systems.

For best results, we recommend diluting White Brite with warm to hot water to fully activate the whitening agent. Due to many factors such as the stubbornness of the stain and the fabric content, it may be necessary to increase the directed dosage and soaking time in order for the stain to be removed. If necessary, we advise increasing dosage by 1/2 cup and increasing soaking time an additional 30 minutes until stain is removed.

OUT White Brite cannot create color. If any of the laundry was colored and contained dye, including off-white colors, stripes, tags, embroidery or logos, White Brite may have pulled color or dye and re-deposited the dye on other fabrics within the load. If the clothing was all white, sometimes the product can pick up on blue dyes present in a detergent or liquid softener. We recommend washing your clothing again using only OUT White Brite and use a higher concentration (1 to 1.5 cups of White Brite). Increase soak time to 45 minutes and allow the washing machine to run through an entire cycle, using only OUT White Brite.

OUT White Brite is not formulated with a surfactant or foaming agent. It is likely the foam was caused by the laundry soap or softener. The foam can simply be wiped out.

This was likely caused by a reaction of iron-rich water and sunscreen, not the White Brite itself. Sunscreen includes an ingredient called avobenzone and it is responsible for causing the staining on the clothing. You will not see the stains until you wash because it is the reaction with the iron in your water that causes the stains. Unfortunately, there is no remedy that can be advised to reverse this currently. The best solutions is to use a product like Iron OUT^® to remove the iron from your water, and then hand wash items that have come into contact with sunscreen with the iron-free water.

If OUT White Brite is mixed with bleach or peroxide, a chemical reaction resulting in fumes may occur and OUT White Brite will be ineffective. Open the nearest window and ventilate if fumes are formed as a result of mixing.

When used as directed, OUT White Brite is safe for use with all fabric types and will not attack the clothing fibers like bleach or peroxide.

When used as directed, White Brite is safe for use in all washing machines, including front loading, top loading and HE machines. Refer to the label directions for usage instructions and dosage.

For best results, we recommend soaking items in a colorless plastic container, bucket or a utility sink. Items may also soak in the washing machine after the tub fills by pausing or stopping the machine before the wash cycle begins. Depending on the nature and stubbornness of the stain, we recommend soaking for 5 – 30 minutes and no longer than necessary.

For best results, White Brite should be used with warm water, which allows the chemical to completely dissolve and fully activate the whitening agent.